| |
The Hopper Sump Unit
|
 |
|
304 Stainless Steel Construction - will not rust or crack
due to wet weather or temperature changes.
|
|
Salt charge capacity is approximately 8 cubic yards |
|
Approximately 3000 gallons of Salt Brine pre hour
with 1½ inch tap water supply |
|
Up to 7000 gallons of Eutectic Salt Brine per salt load |
|
Provides hydraulics and controls for clean out dumping
integral to the brine making system |
|
Includes hydraulic driven pump for filling tanks on trucks |
|
|
The salt hopper should be located in an area easily accessible to front end loaders not only to load the hopper, but also to assist with clean out of non-soluble debris that are commonly found in road salt.
|
|
| |
Hydraulic Pumps |
 |
|
Allows infinitely variable flow adjustments via hydraulic flow controls |
|
Eliminates need for troublesome globe valves in the brine lines |
|
Incorporates silicon carbide shaft seals with four times the life
of ceramic seals |
|
Has flange ports for zero leakage and ease of disassembly
for maintenance |
|
|
| |
|
|
| |
15 HP Hydraulic Power Unit |
 |
 |
Supplies power for brine production |
|
Supplies power for the hydraulic cylinders
for clean out |
|
Supplies power for the hydraulic truck fill pump |
|
The High Voltage Motor is remote from
the operators 12V DC control panel |
|
Shuts down automatically saving total energy cost |
| |
|
|
|
|
|
| |
Tap Water Blender Valve |
|
Inside the Control Panel |
|
|
The Automatic Brine System is controlled by the PLC |
|
A pressure gauge is included for checking the Dump Cylinder, Truck Fill Pump, Transfer Pump, and Recirculation Pump pressure |
|
|
|
|
|
| |
Key Benefits: |
|
Totally automatic salt brine production process - just add salt!
|
|
Reduce salt usage, resulting in a lower salt budget
|
|
No shoveling of leftover trash from the production process
|
|
Constructed from durable, environment-resistant 304 Stainless Steel |
|
)
)
